Experience excellent maneuverability. The Kubota DMC8500 Series come equipped with a center pivot and swivel hitch headstock. This important advantage in mower design allows operators to mow in one continuous pattern, without the need for constantly opening up new headlands. This trailed mower conditioner covers more ground with an 10'6" (3.2m) - 15'5" (4.7m) working width and heavy-duty suspension system built for maximum flotation. Available in roller and tine conditioning configurations
Features
Three-bladed discsWith three blades per disc, Kubota mowers provide a 50% higher cutting frequency compared to conventional solutions. This means a third less load per blade, an even load on the drive, smoother power usage, and produces a neat, cleanly cut stubble.
Features
Fully welded cutterbarThe Kubota cutterbar’s high cooling and lubrication efficiency oil pump system reduces wear and tear. The fully welded cutterbar with overlapping C-channels makes for a very strong design requiring low maintenance with no risk of loose bolts.
Features
Shear ProtectionShear protection of gear wheels and the drive system designed to break in case or overload or major contact. Once sheared, the hub is easily replaceable for minimum downtime.
Features
Counter-rotating discsAn even number of counter-rotating discs provides generous overlap between all discs and a better crop throughput.
Features
Independent Active SuspensionThe complete mowing section, is suspended independently from the main chassis by either two or four long adjustable suspension springs, allowing field tracks and contours to be closely followed. If an obstacle is encountered in the field, the mowing section will lift up and backwards, protecting the cutterbar from damage.
Features
Easy adjustment of stubble heightA simple crank adjusts the whole cutterbar assembly angle up or down to a desired stubble height. While standard with 40 mm skid shoes, additional 20 mm, 60 mm or 80 mm are available to further adjust cutting height.
Features
Full-width Semi Swing Tine ConditioningThe Kubota SemiSwing tine conditioner with adjustable conditioning hood is highly adaptable to varying crop types. During operation tines will stay in a fixed position, providing full cutterbar width conditioning with minimum wear.
Features
Full-width Rubber Roller ConditioningRoller conditioning provides gentle, yet effective handling of fragile crop such as alfalfa or clover. The adjustable spring-controlled pressure exerted between the two rollers guarantees uniform conditioning and low risk of plugging.
Features
Adjustable Swath FormationEasy adjustable windrow width ranging from narrow to widespread. Rear deflector is fully adjustable to help stand the crop up or lay it down allowing for different windrow textures.
Features
Ease of Adjustments and MaintenanceSingle-bolt or optional hydraulic stubble height adjustment, swing-away front curtain and hood, optional hydraulic roller separation kit and, accessible cable and hose routing.
Features
BX Belt Merger KitThe optional BX belt merger kit can be fitted on trailed DMC's to deposit one swath onto another creating fuller windrows. When not needed, it can be lifted up and out of the way for typical single swath formation.
Features
Exceptional ManeuverabilityThe Kubota DMC8500 Series come equipped with a center pivot and swivel hitch headstock and gear box. This important advantage in mower design allows operators to mow in one continuous pattern, without the need for constantly opening up new headlands.
